Description
Tapecoat TR Green is 35 mil, cold applied coating designed to provide protection against corrosion and electrolysis on below grade metal substrates. Combined with strong, flexible film backing, Tapecoat TR Green provides a protective coating with cohesive strength and durability that conforms well to irregular shapes.
Tapecoat TR Green has an integrated primer; the primer is in the adhesive. This exclusive formulation allows for faster application as there is no need to apply a separate primer when application temperatures are above 40°F. The Tapecoat TR Green coating system is VOC free when applied without a primer. When used with Tapecoat Omniprime the coating system will meet even the strictest environmental laws.
Recommended Use
The flexible backing makes it a good coating for hand wrapping. Appropriate for coating and reconditioning small to moderate diameter pipe, bends, tees and metal structures, as a single component coating below grade.
Substrate Compatibility
Steel, Stainless Steel, Ductile Iron, other metals, FBE, PE, PP
Surface Preparation
SSPC SP-2 Hand Tool Cleaning, SSPC SP-3 Power Tool Cleaning or SSPC SP-6/NACE No. 3 Commercial Blast Cleaning
Optional Primer
Tapecoat TR Green has an integrated primer to allow for quick, easy and permanent adhesion. When required by the job specification or when application temperatures are below 40°F, a 4 mil WFT of Tapecoat Omniprime may be applied to the pipe surface to ensure the required bond.
Reference
Tapecoat TR Green meet all of the performance criteria listed in the most recent revisions of:
- NACE SP0109 (Cold-Applied Laminate Polymeric Tapes)
- ANSI/AWWA C209 (Type II)
Safety
Refer to Material Safety Data Sheet: MSDS-TC-GRAY
Application
Refer to Application Guidelines: AG-COLD-APPLIED-ELASTOMERIC-TAPE