P Epoxy/Primer for High Temperatures up to 140°C by CANUSA-CPS

Product Description

Canusa-CPS P Epoxy/Primer is a specially formulated 100% volume solids (solventless) two-component epoxy with a high temperature range to 140°C (284°F).

P Epoxy/Primer is typically used as an epoxy primer in a three-layer coating system for superior corrosion protection of field welded joints of steel pipes or as an overcoat in multi-layer sleeve systems. Usage of Canusa's proven method of force curing the P Epoxy/Primer to the steel enables the installer to "pre-inspect" the joint prior to field joint application. This provides the assurance that the pipe is fully protected and it will not be displaced and exposed to corrosive contaminants during field joint installation.

Application

1. Prepare the pipe surface as recommended in the product-specific Installation Guide.

2. Follow the mixing instructions that are contained within the epoxy packaging.

3. With a gloved hand, pour the combined mixture onto the pipe.

4. Begin spreading the epoxy primer (to a uniform thickness) circumferentially around the pipe surface using the applicator pad.

5. Use a wet film thickness gauge to ensure a correct, uniform thickness has been achieve all around the pipe.