IsoJoint, Meter Service Fitting by APS

Description

Meter Service Fittings are manufactured in accordance with the highest technical standards which guarantee: • Mechanical requirements are met for the specific need of meter installations. • Insulating requirements are achieved and surpass the electrical characteristics of the product transported through the pipe.

• Does not require maintenance for lifetime of 20 years
• Easy, accurate, and safe installation
• Can be threaded into line, welded without leakage or damage to internal insulators
• No worry of ill fitting parts
• Internally lined and externally coated with Nitrocellulose Enamel
• Integral part of the joint with electrical and dielectrical characteristics and strong resistance to chemical agents
• High tensile with traction and bending
• Suitable for above ground work up to 10 BAR=150 PSI with constant operating pressure
• Guaranteed sealing if pressure raised beyond maximum operating level; hydraulically tested at 15 BAR=220 PSI
• Two internal seal bushings
• Not consumable, can be re-used
   

 Meter Service Fittings are manufactured in accordance with the highest technical standards which guarantee: 

• Mechanical requirements are met for the specific needs of a plant – Full technical details should be supplied.
• Insulating requirements are met and surpassed in regard to the electrical characteristics of the product carried in the pipeline

When ordering, please give the following information: 

• Diameter of pipe
• Style, Male/Male etc...
   

Now available from APS, Copper and Steel Water Service Fittings Available:

• M x M NPT Thread
• M x F NPT Thread
• MNPT x Weld
• FNPT x Weld
• Weld x Weld
• F x F NPT