HBE-HT Brush Grade Epoxy by Canusa-CPS

HBE-HT is a state-of-the-art surface coating designed to solve specific industry problems by combining the unique features of epoxy and proprietary cure technologies. HBE-HT is a 100% solids, two-component epoxy coating system which has been specifically designed as a protective coating for pipelines operating at elevated temperatures. This coating is available in brush and spray grade formats.

Typical Uses: Protective coating for pipelines in buried or immersed applications. Used as a direct­to-metal corrosion resistant coating and as a rehab coating on steel pipelines and at girth welds. Also used as touchup material for mainline coatings. Excellent coating for pipeline valves, fittings, and bends.

Features & Benefits

• High Build in a single coat
• Sets and Cures over a broad temperature range
• Environmentally safe
• 100% solids, Zero V.O.C.
• Excellent adhesion to grit blasted steel - an ideal mainline corrosion coating for pipelines
• Superior adhesion to Fusion Bonded Epoxy (FBE) Coatings - ideal coating for joint protection and repair of FBE coated pipe.
• Excellent chemical resistance
• Outstanding resistance to cathodic disbonding up to 120°C (248°F) operating temperatures
• Easily applied with brush, roller or a heated, airless spray system

Key Technical Data

• Coating Description: Phenolic Epoxy
• Conversion to Solids: 100%
• Theoretical Coverage:
  425 mil-sq.ft. / liter
  1605 mil-sq.ft. / US gallon
  1.0 mm-m² / liter
• Typical Thickness: > 20 mils (500 microns)
• Flashpoint (T.C.C.): >120°C (250°F)
• Mixing Ratio: 3 parts base, 1 part cure by volume
• Safety: MSDS HBE HT Base, MSDS HBE HT Cure

Typical Cure Schedule

• Oil & Gas
• Repair & Rehab
• Corrosion Coating
• Girth-Weld Joints
• Fittings & Bends
• High Temperature

   

• Spray Application
• Brush Application
• Roller Application
• Sleeve Compatible

CANUSA-CPS is a leading manufacturer of specialty pipeline coatings which, for over 30 years, have been used for sealing and corrosion protection of pipeline joints and other substrates. CANUSA-CPS high performance products are manufactured to the highest quality standards and are available in a number of configurations to accommodate your specific project applications.