DryConn Direct Bury Lug by King Innovations

• For use with low voltage tracer lines under 50 volts.
• Waterproof.
• Corrosion proof.
• One piece for easy installation.
• Installs in one minute or less, not including wire stripping.
• Wire range #14 - #10 AWG.
• High impact housing with user friendly design to prevent cuts or handling discomfort.
• Pre-filled with silicone.
• Approved for direct bury.
• No cutting of the main service line required.

The Direct Bury Lug was designed for contractors in the gas utility market to reduce the amount of time required for a splice. The one-piece, silicone-filled lug is easily installed in less than one minute (not including wire stripping). Ideal for use in low voltage wiring, including cathodic protection systems, test leads, tracer wire, landscape irrigation, landscape lighting, and golf.

In addition to being waterproof and corrosion proof, the Direct Bury Lug has a wire range from #14 to #10 AWG and features a high impact housing with rounded edges to prevent cuts or handling discomfort. The connector is approved for direct bury and can be used with low voltage tracer lines under 50 Volts.

King Innovation is the creator of DryConn™ Waterproof Connectors, America's patented silicone-filled wire connectors.

Product Specs

• Max. Voltage: 50V
• Connector Size: 1.18” x 2.04” x 2.57"
• Wire Range:
      #14-8 Solid Copper
      #14-6 Stranded Copper
      #14-10 Steel Core Tracer Wire (CCS)
• Conductor O.D. Range: .124” - .408”
• Silicone Sealant Temperature Rating: -45°F to 400°F