CPSystemBD. Amprobe Multimeter Accessories

Part No.

Description

TL1500

Test Leads with Alligator Clips
Cat IV 1000 V (1500V Max).Supplied with meter.

FP700

Replacement Fuse, 2A/1500V. Pack of two.

TA-1A

Temperature adapter, K-type thermocouple.

CT235A

1000A Amp Clamp Accessory Current Transformer Probe

Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

Maximum current	1000A, AC or DC
Division Ratio	1000:1
Output to Meter	200 A: 1A at jaws = 1 mV to meter 1000 A: 1A at jaws = 1 mV to meter
Dimensions	55 x 220 x 30 mm (2.2" x 8.6" x 1.2")
Weight	320 g (0.7 lb)
Max Conductor Size	31 mm (1.2")
Lead Length	1.5 m (59")
Power	9V battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life	50 hours (alkaline)
Meter Input Impedance	10 k Ohms min, 100 pF max
Overload Protection	700A for 10 min and 20 min Off 300 Vac on uninsulated conductors

CT237A

200A Amp Clamp Accessory Current Transformer Probe

Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

Current Ranges	20A, 200A, AC or DC
Division Ratio	1000:1
Output to Meter	20A: 1A at jaws = 10 mV to meter 200A: 1A DC at jaws = 1 mV to meter
Dimensions	55 x 210 x 30 mm (2.2" x 8.3" x 1.2")
Weight	290 g (0.64 lb)
Max Conductor Size	19 mm (0.75")
Lead Length	1.5 m (59")
Power	9V battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life	50 hours (alkaline)
Meter Input Impedance	10 k Ohms min, 100 pF max
Overload Protection	700A for 10 min and 20 min Off. 300 Vac on uninsulated conductors.

CT238A

20A Amp Clamp Accessory Current Transformer Probe

Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

Current Ranges	20A, AC or DC
Division Ratio	10:1
Output to Meter	1A at jaws = 100 mV to meter
Dimensions	55 x 210 x 30 mm (2.2" x 8.3" x 1.2")
Weight	290 g (0.64 lb)
Max Conductor Size	19 mm (0.75")
Lead Length	1.5 m (59")
Power	9V battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life	30 hours (alkaline)
Meter Input Impedance	10 k Ohms min, 100 pF max
Overload Protection	500A, 300 Vac on uninsulated conductors

VC221B
Padded Vinyl Case
Fits meter & holster.

DC205C
Deluxe Hard-Shell Carry Case

DC207C
Large Deluxe Hard-Shell Carry Case
With extra space for accessories

HV231-10A

Handheld High-Voltage Probe
High voltage probe for AC or DC extends voltage measuring to 40 kV. Use with standard multimeters with 10 MΩ input impedance.

Dimensions	340 mm (13.3") length, 30 mm (1") handle, 75 mm (3") guard.
Weight	218 g (7.7 oz)
Cable Length	1 m (39")
Input Resistance	1000 MΩ
Maximum Voltage	40 kV peak, 28 kV AC RMS
Accuracy	DC (1 kV to 20 kV): ± 1 % DC (20 kV to 40 kV): ± 2 % AC (1 kV to 20 kV) (50/60 Hz): ± 5 %