4000-35 PCS Primerless Coating System by Polyken

4000-35 PCS Primerless Coating System by Polyken
Ship to
Shipping Method
Estimated Delivery
No shipping options

System description

Polyken 4000-35 PCS is a cold applied coating system designed for the corrosion protection of field joints, fittings, and specialty piping .This system does not require a primer or liquid adhesive. This versatile coating system can be applied by hand or with a wrapping machine.

Polyken 4000-35 PCS can be applied to wire brushed or sandblasted pipe surface. The high-tack butyl rubber adhesive is designed for high initial adhesion even during extreme cold weather applications. The tacky adhesive has a plastic release liner to enable proper unwinding of the roll. Coupled with the highly conformable polyethylene backing, the adhesive optimally flows, fills and instantaneously bonds to the substrate.

Product Features & Benefits
  • No primer needed
    Labor saving application.
  • Environmental friendly
    Eliminates VOC emissions.
    Eliminates dangers associated with a hazardous product.
  • Compatible with generic plant coating systems
  • Heavy duty high-tack adhesive
    Ensures a strong bond & impervious seal.
  • Meets AWWA C209 standard
    Reliable high performance corrosion protection
  • Conforms to irregular shapes
    Offers a solution for nearly every application.
  • For above and below ground use
Product Selection Guide

Operating temperature range

30°F( -34°C) to 122°F ( 50°C )

Additional mechanical layer

955 or 954

Compatible line coatings

PE, FBE, Tape and Coal Tar DS-4000-35-PCS-REV1-1206

Recommended pipe preparation

SSPC-SP2, SP3 and SP6 ST 2 ½ - ST3



Product Construction

Total Thickness

35 mils (0.89 mm)


6.5 mils (0.17 mm)


28.5 mils ( 0.72mm)

Backing color